Skip to main content

Strefa Tradingu · Manual

SRL Trifecta 🎯

SRL Trifecta 🎯 is a companion to the main SRL [Pro] indicator that automatically detects three setups inside the range: Flow Rejection 🌊 (a rejection off the equilibrium zone), Rebalance ⚖️ (price returning to equilibrium after a breakout), and Einstein ⚡ (an extreme reversal off the edge of the range). It overlays on the same chart as SRL [Pro] and prints signals as LONG/SHORT labels alongside a mini status panel. One condition to keep in mind: your sync settings must be identical to the main SRL [Pro] — otherwise the levels will drift apart.

Quick start​

SRL Trifecta 🎯 is an invite-only indicator. Once you get access, open “Indicators” on TradingView → the “Invite-only scripts” tab → add “SRL Trifecta 🎯 | Strefa Tradingu” to the same chart where you already run SRL [Pro].

Critical: sync with SRL [Pro]​

Trifecta calculates the range exactly the same way as the main indicator, so the 🧬 Sync with SRL [Pro] group MUST hold the same values you use in SRL [Pro]:

  • 🌀 Fractal Harmonic — default 2187. Set the exact same number you have in SRL [Pro].
  • ⚡ Auto-Calibrate (AI Mode) — default on. Leave it on if SRL [Pro] has it on too (it auto-scales to the instrument's price).
  • 🔓 Override Harmonic Lock — default off. Turn it on ONLY if SRL [Pro] also has it on, and then enter the same “Custom Fractal Value”.

If these three don't match, your signals will print in the wrong places.

How to read the main signal​

A signal is a label at the candle plus an entry in the 📊 Trifecta panel (top-right by default):

  • ▲ LONG (green) below the candle / ▼ SHORT (red) above the candle.
  • Range Pos — price position within the range as a percentage; Zone tells you where you are: PREMIUM (>66%, expensive), FLOW (middle), DISCOUNT (<33%, cheap).
  • Icons distinguish the setup: 🌊 Flow Rejection, ⚖️ Rebalance, ⚡ Einstein (⚡/⚡⚡/⚡⚡⚡ = Standard/Extreme/Ultra — the more, the rarer and stronger).

All signals confirm on candle close — they don't flicker intrabar.

Example: BTCUSDT H1​

On BTCUSDT, H1 timeframe: price dropped to the bottom of the range (Range Pos ~5%, Zone DISCOUNT), pushed into Einstein's ultra-extreme zone, then after 2 confirmation candles climbed back above the threshold. On candle close the label ⚡⚡⚡ EINSTEIN ▲ LONG (ULTRA) prints below the candle, the panel shows ⚡ Einstein: ▲ ULTRA, and if you have the Einstein alert enabled — a webhook fires in the format [BTCUSDT 60] ⚡ EINSTEIN LONG (ULTRA) @ ....

Questions and answers​

How do I get access to the indicator?​

SRL Trifecta 🎯 is invite-only and granted manually to your TradingView account as part of Strefa Tradingu. Once access is granted you'll find it in the “Indicators” window under the “Invite-only scripts” tab, and you add it to the chart from there.

Which timeframe and instrument does it work best on?​

The indicator works on any timeframe and instrument — the range logic scales itself (Auto-Calibrate). In practice the cleanest setups show up on M15 and higher (H1, H4). The key point is that the timeframe and instrument must match the ones your SRL [Pro] is running on.

How do I set up alerts?​

In the 🔔 Alerts group, enable the types you want: 🌊 Flow Rejection Alert, ⚖️ Rebalance Alert, ⚡ Einstein Alert. Then create a single TradingView alert on the “SRL Trifecta 🎯” indicator with the condition “Any alert() function call”. The message is already bot-ready, e.g. [SYMBOL TF] 🌊 FLOW REJECTION LONG @ price | Range: 30%. Alerts fire once, on candle close.

Which signal is the “main” one?​

There's no single master signal — Trifecta detects three independent setups at once. You tell them apart by the icon and the panel: 🌊 Flow Rejection (a rejection off the middle of the range), ⚖️ Rebalance (a return to equilibrium after a breakout), ⚡ Einstein (a reversal off the edge). The 📊 Trifecta panel shows the status of each one separately, so you can see which setup just triggered.

I set a different Fractal Harmonic than in SRL [Pro] — why are the signals nonsense?​

This is the most common mistake. Trifecta rebuilds the same range as SRL [Pro] from the 🌀 Fractal Harmonic field (plus Override/Custom and Auto-Calibrate). If those values differ, the range and the Premium/Discount zones are calculated differently than on your main chart, and the labels land in the wrong spots. Copy the settings from the 🧬 Sync group 1:1.

I turned on “Override Harmonic Lock” only in Trifecta — what happens?​

If Trifecta has 🔓 Override Harmonic Lock on while SRL [Pro] has it off (or vice versa), the two indicators calculate a different range. That toggle and “🛠️ Custom Fractal Value” must be in the identical state in both indicators. Leave it off by default, unless you're deliberately running manual mode in SRL [Pro].

I confuse Einstein Standard with Ultra — what's the difference?​

It's a grading of how deep price pushes into the edge of the range. ⚡ Standard = a moderate edge (more frequent), ⚡⚡ Extreme = stronger, ⚡⚡⚡ Ultra = the deepest edge (rarest, but the strongest signal). The label and panel show the grade in parentheses (STANDARD/EXTREME/ULTRA). Don't treat a Standard like an Ultra — they're different confidence levels.

I don't see any signals — what am I doing wrong?​

A few common causes: (1) the market is in the middle of the range and there simply isn't a setup yet — Trifecta signals rarely by design; (2) you disabled a strategy in the 🎯 Trifecta Strategies group (Flow Rejection / Rebalance / Einstein) or turned off signal visibility; (3) signals wait for candle close, so nothing prints intrabar; (4) your sync with SRL [Pro] has drifted. Also check that the 📊 Trifecta panel shows a sensible Range Pos.

Do the signals move / repaint?​

No. All three setups confirm on candle close (Einstein additionally requires a set number of confirmation candles — the “Confirmation Bars” field, default 2). While a candle is still forming a signal may be “developing,” but the confirmed label and alert only appear after close and don't move afterward.

How do I combine Trifecta with other SRL indicators?​

Trifecta is a companion to SRL [Pro] and is meant to sit on the same chart — SRL [Pro] draws the zones, Trifecta adds ready-made entry signals inside those zones. It works best as confirmation: a Trifecta signal aligned with the structure/trend direction from other SRL tools (e.g. Trend Filter, Fractal Structure) is a stronger setup than the signal in isolation.